Product Introduction
 

RB1095 Waterborne Resin Coalescent

Waterborne Paint Tg Reducer RB-1095

FEATURES

    RB-1095 is a adipate type low VOC coalescent for waterborne coatings like acrylic emulsion, polyvinyl acetate, ethylene vinyl acetate resins to replace high VOC product of DBP.

    RB-1095 is especially designed for those waterborne paint or resin used in cold area or need very low Tg product. RB-1095 with excellent Tg suppression and viscosity response ability make it is possible to use more less than benzoate and phthalate to gain the expected Tg and with higher viscosity paint.  
   
    RB-1095 can be used alone or conjunction with our benzoate RB-1050 to formulate your perfect product.
   
    RB-1095 performance table:
 

 

10phr coalescent

added

EVADA-101

Original

Benzoflex

2x88

RB-1095

RB1050/

RB1095=1/1

Tg()

3

-9.7

-23.8

-16.1

VS(cps,12rpm)

3200

20800

25800

24800

Filmclarity

milky

clear

clear

clear


SPECIFICATIONS
 

Acid Value,mg

KOH/g.

:0.2 max

Appearance

:ClearLiquid

Color,APHA

:25 max.

Moisture,Wt.%

:0.1max.

Refractive [email protected] 25ºC

:1.4451.448

OH Value, mgKOH/g

:2.5max.

SpecificGravity@ 25ºC

:1.0171.024

Viscosity @25ºC cps

:1725



 

HIVI 100 Plastics Chain Extender

PET Chain Extender

Introduction

     HIVI-100/200, are a low-cost additive converting recycled PET flakes into high-IV crystalline pellets that can be used in high-value applications (bottles, strapping, foam, engineering alloys/ compounds).

 


Characteristic

HIVI-100/200 are suitable for the following applications:

1.
Enhancement of the intrinsic IV( Intrinsic Viscosity) of PET/ PBT/ PA/ PLA/PC/ TPU.
2.
Melt strength enhancement of PET and PBT for the production of blown foams.

3. To substitute PET SSP with significantly cost and manpower reduce.
4.
As a melt viscosity and melt-strength-enhancing additive for modifying PET for film blowing and extrusion blow molding applications.
5.
Upgrading of recycled PET flake to resin suitable for bottling applications (>0.80 dL/g).

6. As an additive to reduce the time necessary for solid-phase polymerization of PET and PBT resins.
7.
To increase the elongation viscosity of PET and PBT resins by facilitating extended and branched architectures.

HIVI-100 Spec.

1. Appearance : White Granules
2.
Volatile: 0.5% Max

3. Melting Point : 130~190

4. Bulk Density : 460~570 g/ l

Process Parameters

1. Feeding Zone : 190-200 (°C)

2. Melting Zone : 270-280 (°C)
3. Metering Zone : 270-280 (°C)
4. Die Zone : 280-290 (°C)

Reference of Lab Testing Result

 


 

P-1185, P1186 PCB Banking Agent

P-1185, P1186 PCB Banking Agent

PCB Banking agent improve the anisotropy of etching to control the surface reaction rate typically by forming a film on the vertical walls of the newly formed fine line of circuit lines.

PCB Banking agent P-1185 is appropriate to be used in alkalinity etchant and P-1186 is proper to be used in acidity etchant.

14场胜负奖金